Russians like apartments with balconies. The real estate market apartment without a balcony are cheaper compared to the same shelter, but with a balcony. And these days people love him glazing. Gazebo to some extent extends the living area of apartments, offsetting its lack. Balcony is emerging from the plane of the wall facade of the house enclosed area which serves to relax in the summer. A loggia is a built-in or built-on, open the outer space, usually fenced on three sides by walls (with two – with the angular location of) the placement. And balconies and loggias can be glazed. What are the possible options for glazing balconies and loggia? Standard glazing is a wooden frame with a conventional glass.
Nowadays it is used less and less. If sheathe the inside walls or hardboard paneling, it will increase the temperature of the air on the balcony at the 2-3 degrees and slightly reduce street noise. But we should not forget that the frame should not only properly install, but also handle the seams and joints with silicone sealant, foam, strengthen the sill and visor. The cost of such glass depends on the materials used. Get all the facts for a more clear viewpoint with Carl Rogers. Balcony design with a conventional wooden window frames and single glazing can only protect against wind, rain and snow. ‘Cold’ aluminum.
This design represents aluminum frame with single glazed with a minimum thickness of 5 mm. Sliding sash do. Aluminum loggia or balcony looks elegant, but has a low thermal insulation. The difference in temperature on the street and in the glass loggia – 5-7 degrees. This is one of the most common in our time means glazing. Cold glazing a balcony or loggia allows to save space, because windows are sliding. Except that design can make up to 30 cm in front and sides, thus increasing the terrace area. Aluminum structures for glazing of loggias and balconies are relatively light, which allows you to install them on all types of balconies and loggias. With a warm glazed room balcony or loggia will be well protected from frost, excessive heat and noise. For a warm glass can be used pvc profiles, or ‘warm’ aluminum. Profile pvc with Fiberglass – almost perfect protection against cold and noise. Please Note: The interior walls glazed ‘in plastic’ balcony or loggia must necessarily be insulated with plastic panels. Otherwise, the walls will fall moisture, and subsequently will certainly mold. ‘Warm’ aluminum. In the aluminum profile and add a thermometer insert through this glazing excellent protection from the cold. Such glazing goes even more expensive than pvc, so aluminum structures are appropriate when your balcony or loggia have an unusual configuration.